rr14
New Member
Posts: 11
|
Post by rr14 on Apr 22, 2013 20:26:34 GMT -7
I just picked up a pair of these subwoofers today. Well they work okay in an infinite baffle configuration?
|
|
|
Post by FOH on Apr 23, 2013 5:44:58 GMT -7
Do you have the driver's specs? The TS parameters?
With those numbers we'd be glad to tell you.
|
|
rr14
New Member
Posts: 11
|
Post by rr14 on Apr 23, 2013 8:50:02 GMT -7
Qts .369 Qes .37 Fs 26 Re 3.5 Vas 228 Mms 307.0 Bl 22.10t Sd 1200 Xmax 22 mm
|
|
|
Post by ThomasW on Apr 23, 2013 11:48:45 GMT -7
They'll work.
They're a bit overdamped so you'll need bottom end EQ. And depending on the size of the room and how loud you intend to play them you'll need to watch and not exceed the 22mm of Xmax
|
|
rr14
New Member
Posts: 11
|
Post by rr14 on Feb 1, 2014 15:26:33 GMT -7
well, I've had the system up for 6 months and I've been super happy. This setup sounds amazing. Today I just ordered an inuke 6000dsp to replace the crown xls 1500. Would the subs mentioned above play kindly with the fi infinite baffle 18" subs? I'm thinking of adding two in a manifold at the rear of the room (the ed's are at the front of the room). The two setups would share the same storage room but will be about 25 feet apart. Would that work? I now will have enough power to run all 4 with plenty of room to spare (amp puts out 2200 watts rms per channel). Thanks!
|
|
|
Post by ThomasW on Feb 1, 2014 20:53:18 GMT -7
To balance the system, the output from the Fi drivers will be limited to the lower output of the Ed drivers
|
|
rr14
New Member
Posts: 11
|
Post by rr14 on Feb 2, 2014 14:55:08 GMT -7
would it be horrible to use them in one manifold together or should I definitely use 2 manifolds?
|
|
|
Post by ThomasW on Feb 2, 2014 17:11:04 GMT -7
Use a separate manifold for each brand of drivers
|
|