|
Post by titch on Jul 23, 2006 18:26:49 GMT -7
Got a question I already have 2 large ones in the front 2 corners. One is 20x60x4 and the other one is 20x72x4. I just made another small bass trap and I was wondering something. Heres a pic of it. Its 12 wide 11 high and 5 1/2 deep in the middle. I will be making 7 more of these and will be putting them across the front/ceiling wall. So my question is, will this be adequate enough if all of them are in place. Cause after I have made them they are looking alittle small to me. thx
|
|
|
Post by ThomasW on Jul 23, 2006 19:18:30 GMT -7
If possible the corner units should be floor to ceiling height.
5.5" deep won't do much for low bass
|
|
|
Post by titch on Jul 23, 2006 19:31:08 GMT -7
Dont most people only go about 4 inches for thickness of their panels?
|
|
|
Post by ThomasW on Jul 23, 2006 19:37:52 GMT -7
My corner bass traps are 24" deep
|
|
|
Post by titch on Jul 23, 2006 19:41:39 GMT -7
Do you have a roll of something or did you put like 24 1inch panels togerther to get that?
|
|
|
Post by ThomasW on Jul 23, 2006 19:47:25 GMT -7
I made 1/4 cylinders, wood framed covered with metal mesh, 8' tall that were stuffed with fiberglass.
|
|
|
Post by titch on Jul 23, 2006 19:50:27 GMT -7
|
|
|
Post by titch on Jul 23, 2006 19:53:31 GMT -7
Got one more question for yeah. What do you use around the ceiling if you dont mind me asking.
|
|
|
Post by ThomasW on Jul 23, 2006 20:25:47 GMT -7
Got one more question for yeah. What do you use around the ceiling if you dont mind me asking. Nothing
|
|
|
Post by titch on Jul 23, 2006 20:38:37 GMT -7
Ok thx
|
|