|
Post by chadcummings on May 17, 2008 10:07:29 GMT -7
The only thing I haven't settled on is going with a Face F700TS or a F1200TS.
If I go with the 1200 I will have plenty of room to add drivers in the future as well as it will be running fairly idle.
What would you recommend.
|
|
|
Post by ThomasW on May 17, 2008 11:26:56 GMT -7
The usual thing people do is add up the recommended power per driver then buy an amp for that rating. Doing that ignores the min +3dB output gained from each doubling of the number of drivers. This means an increase in the number of drivers being used doesn't necessarily translate into a need for bigger and bigger amps.
That said, if you have the money for the 1200, it's not a reasonable longterm investment to opt for a higher power amp.
|
|
|
Post by chadcummings on May 17, 2008 11:47:29 GMT -7
That said, if you have the money for the 1200, it's not a reasonable longterm investment to opt for a higher power amp. Hmm...its very late where I am... I think you meant it's not an unreasonable longterm investment. Not trying to be funny. The difference in price between the 2 is only $100 so I think the 1200 is the way to go. My next step is to start buying a DEQ and what I need to use REW.
|
|
|
Post by ThomasW on May 17, 2008 14:15:12 GMT -7
IMO there's no reason to buy a DEQ2496 to EQ a sub, the FBQ2496 or the DSP1124P will do the job just fine.
|
|
|
Post by chadcummings on May 17, 2008 20:46:01 GMT -7
Yep...u r correct.
I just cant wait to finish my project...but that will be a while from now.
In fact, I just ordered me a FBQ2496.
|
|