Nordo
Full Member
Posts: 118
|
Post by Nordo on Jun 28, 2008 3:09:00 GMT -7
I'm setting up a EP2500 for my IB sub. I already have a Behringer DSP1124P (FBD). I will connect the two together use balanced XLR connections.
When pairing them two, should I set the operating level on the DSP1124P to +4dBV or -10dBV?
The DSP1124P will be fed with a low level signal from an Onkyo 805 receiver.
Thanks
|
|
|
Post by ThomasW on Jun 28, 2008 7:44:14 GMT -7
|
|
Nordo
Full Member
Posts: 118
|
Post by Nordo on Jun 28, 2008 21:32:20 GMT -7
Thanks Thomas I had read your article, and I've always had my FBD set on -10dB, but I didn't know if I should change it when connecting to a pro-sound amp - especially a Behringer. Thanks again.
|
|