|
Post by moggie on Jan 19, 2010 12:10:59 GMT -7
I'm finally getting to wire up my IB subs. Have 4xFi 18" and a Behringer EP4000 amp. The drivers have 4 ohm coils. I was planning to run the EP4000 in stereo mode. Should I wire each pair of drivers in series for a 8 ohm load or in parallel for 2 ohm? I curious as to the benefits/differences of each.
Thanks!
- Paul.
|
|
|
Post by ThomasW on Jan 19, 2010 17:14:57 GMT -7
The Behringer amps are at their best driving loads 4 ohms or higher.
|
|
|
Post by moggie on Jan 19, 2010 20:57:48 GMT -7
Thanks Thomas. 8 ohms it is.
|
|