paste
New Member
Posts: 7 
|
Post by paste on Aug 27, 2015 9:38:21 GMT -7
Just wondering if a group (4, 8, or 16) of these inexpensive sub woofers would work in an infinite baffle since they do well in ported and sealed boxes for HT. Right now I'm doing fine with just a single ported 18" Ultimax.
Thanks,
Paste
|
|
paste
New Member
Posts: 7
|
Post by paste on Aug 27, 2015 14:49:10 GMT -7
|
|
|
|
Post by maxserg on Aug 27, 2015 17:41:24 GMT -7
No specs here! where are the thiel parameters? This is a sub for car not real IB sub...
|
|
paste
New Member
Posts: 7
|
Post by paste on Aug 27, 2015 18:59:15 GMT -7
Infinity 1260W SpecsThis should direct you to the directly to the PDF manual. Yes, it's designed for a car, but many over at the AVSForum have had good success using it for Home Theater in ported and sealed boxes.
|
|
|
|
Post by ThomasW on Aug 28, 2015 7:38:14 GMT -7
but many over at the AVSForum have had good success using it for Home Theater in ported and sealed boxes. They have ~12mm Xmax. The drivers we typically use in IB subs have 30mm or so Xmax. A dozen 1260W cost about the same as a pair of Fi 18"s. So I'm not sure what's gained using multiple 1260w. Also it's a whole lot easier to setup and install 2 drivers vs a dozen. |
|
paste
New Member
Posts: 7
|
Post by paste on Aug 28, 2015 7:54:14 GMT -7
but many over at the AVSForum have had good success using it for Home Theater in ported and sealed boxes. They have ~12mm Xmax. The drivers we typically use in IB subs have 30mm or so Xmax. A dozen 1260W cost about the same as a pair of Fi 18"s. So I'm not sure what's gained using multiple 1260w. Also it's a whole lot easier to setup and install 2 drivers vs a dozen. Thanks! |
|
