bandy
New Member
Posts: 15
|
Post by bandy on Sept 9, 2021 11:18:56 GMT -7
My thanks to "Cult of infinitely baffled" mainly to Thomas, who answered several of my questions.
|
|
bandy
New Member
Posts: 15
|
Post by bandy on Sept 9, 2021 11:19:52 GMT -7
|
|
|
Post by ThomasW on Sept 9, 2021 12:28:25 GMT -7
Hi,
The install looks good and the FR plots look great!!!
How does it sound?
|
|
bandy
New Member
Posts: 15
|
Post by bandy on Sept 9, 2021 12:59:34 GMT -7
Sounds Amazing! Better than expected, my previous sub was 15" servo Velodyne, but this thing is WOW. Thanks again! During the testing the "thing" tried to "walk away" had to be bolted to the concrete :-) Weather stripping works well around the manifold opening and does not transfer vibrations much. Attachments:
|
|
clb
New Member
Posts: 4
|
Post by clb on Oct 14, 2021 17:54:44 GMT -7
I'm interested in doing a very similar setup. What amp are you using to drive the IB setup?
|
|
bandy
New Member
Posts: 15
|
Post by bandy on Nov 11, 2021 11:08:13 GMT -7
Hi, sorry for the late reply, I just seen your post. I am running the subs with Crest Audio CA 4, 2 x 400W 4 Ohms. For my room size (1840 cubic feet) the amp has no problem to drive the subs to very high SPL.
|
|
|
Post by carlthess50 on Jul 19, 2022 17:31:04 GMT -7
Question here How well would the Dayton audio pa480-8 18” drivers work ? I’m new on this forum so sorry for jumping on the OP post. Or if someone can send me a link for here on what t/s specs to look for Thanks Carl
|
|
|
Post by ThomasW on Jul 20, 2022 13:02:44 GMT -7
|
|