|
Post by jagman on Nov 19, 2008 13:43:15 GMT -7
I tried to model the 18's in WinISD Pro alpha. Since this driver is not in their data base, I had to add it in. When I tried enterring the T/S parameters in the first post of this thread, an error came up saying "[c]onsistency check on the following parameter groups failied. See the help file for recommended data entry procedure." I rechecked multiple times and the data I enterred is exactly what is in the first post. I'm not sure what I'm doing wrong.
EDIT: When I enter the data in the order requested by WinISD alpha, the problems come because it auto populates VAS and SPL. They say the VAS is 0.30 and the SPL is 59.8. It allows me to save it that way. If I manually change the VAS to 381, then it calculates the SPL as 89.7 (correct), but it doesn't allow me to save it. If I manually enter the SPL as 89.7, it auto calculates the VAS as 381... but again it doesn't let me save it. Very weird. I don't know what I'm doing wrong.
|
|
Eskimo
Full Member
Bass-head
Posts: 143
|
Post by Eskimo on Nov 20, 2008 8:11:25 GMT -7
There's an online help for WinISD that gives you the proper order for the manual entering of T/S parameters, and it really helped when I was having the same issues.
Also, Sonnie from HTS mentioned that one of the parameters was not listed correctly (a decimal point thing), but it doesn't seem to make a huge difference.
Since the IB's are up on the Fi site, hopefully all the data should be populated very soon.
|
|
|
Post by jagman on Nov 21, 2008 10:57:11 GMT -7
Yeah... I got it to work OK. But, since new data is coming out (hopefully soon), that will be more important.
|
|