|
Post by v1rtu0s1ty on Apr 3, 2008 22:50:00 GMT -7
Not really sure where to post this. Hopefully you guys can shed some light to me.
On the manual of my receiver, it says, 110watts for all channels, 20hz-20khz. So if that's the case, how will I know if below 20hz is being sent to my QSC amp where my 2 18" drivers are connected?
Thanks.
|
|
|
Post by jman on Apr 7, 2008 17:32:37 GMT -7
Don't worry about those specs, they usually just do 20-20khz but it should be fine down to 10hz at least. Some amps have an 8hz or 5hz or even 3hz brickwall filter to protect against DC.
|
|
bb
New Member
Posts: 1
|
Post by bb on Oct 30, 2008 12:34:28 GMT -7
Don't worry! RX-V1400 will send on LFE under 20Hz...
Greetings, BB
|
|