|
Post by flashjim on Jun 8, 2006 9:03:11 GMT -7
I'm ready to make the plunge into a sub project, but I'm waffling on IB or a single sealed 15".
The PE IE15 is affordable. Is there anthing else in that price range available in the next couple of weeks? I'm looking for four 15" drivers.
My other choice is a sealed RL-P15.
I have a Nady 1100 amp and the room is rougly 16 x 25 x 10 and is open to other rooms.
So the question is, a decent sealed 15" or a lower end IB?
|
|
|
Post by ThomasW on Jun 8, 2006 11:07:08 GMT -7
If you have to act immediately.....
4-PE IB15"s are only slightly less cost than 2 RL-p15"s. So I'd by 2 RL-p15"s. Then build a manifold capable of holding 4-15" but cap off 2 openings until there's money for a second pair of RL-p15"s. The RL-p15" are significantly better drivers for this application. And 2 RL-p15"s in the manifold will play virtually as loud as the 4 IB15"S
If you can hold off a while there are going to be some interesting new options.
|
|
|
Post by Darren on Jun 8, 2006 11:25:22 GMT -7
Are we still a few months away from hearing anything of these new options?
|
|
|
Post by flashjim on Jun 8, 2006 11:39:32 GMT -7
Thanks Thomas. I was wondering how two RL-P15s compared to the four PE IB15s.
|
|
|
Post by ThomasW on Jun 8, 2006 11:45:39 GMT -7
Are we still a few months away from hearing anything of these new options? Probably a couple months away given beta testing, any mods to the design, then the time necessary for production/shipping and all that other stuff.
|
|