|
Post by mrogowski on Aug 30, 2006 10:33:09 GMT -7
Hi Everyone,
If this is out of line for the board, then please remove it with my apologies...
Due to peer pressure from the car audio world, a 4 Ohm version of the Mach 5 MJ-18 is currently being designed. Here are the prelimiary specs (please note that these may vary a bit):
Fs = 24.3Hz Re = 3.2 Ohm Qts = 0.33 Qes = 0.35 Qms = 4.99 Mms = 310.8g Cms = 0.14 VAS = 265l Bl = 20.9 SPL = 92.2db
This may provide further design options to those who are thinking about using the MJ-18 in an IB config.
Best regards, Mark
|
|
|
Post by kingjamez on Aug 30, 2006 11:52:45 GMT -7
It is interesting to note that the Mms has gone up and the FS has gone down. Sounds like it also may have more power handleing as well. Can you confirm that?
|
|
|
Post by dandan on Aug 30, 2006 13:13:26 GMT -7
when will these be ready to ship?
|
|
|
Post by mrogowski on Aug 30, 2006 13:40:28 GMT -7
Hi Guys,
Regarding the specs, its hard to say at this point if we are dealing with anything beneficial or simply component tolerances. I requested that these be made as close to the 8 Ohm version as possible. The proof will be in the pudding - when the lot gets here and units are randomly tested. That's when we'll know for certain.
Regarding availability, I'm estimating around 8 weeks.
Best, Mark
|
|
|
Post by carpenter on Aug 30, 2006 16:04:51 GMT -7
I assume the Xmax hasn't changed?
|
|
|
Post by mrogowski on Aug 31, 2006 5:35:54 GMT -7
Nope.
Best, Mark
|
|