|
Post by poorboymike on Nov 14, 2005 22:18:36 GMT -7
Anyone here mount their pro amps in a vertical position? I read over the manual and it doesn't say you cant, but it doesn't say you can either. My XA-1100 wont fit in my entertainment center so my thought was to build a nice oak rack that will sit behind my TV and the Nady and maybe an EQ can drop in from the top. I would cut 2 holes at the bottom for vents and wires so it could still breath.
Anyone see a problem with this?
|
|
|
Post by ThomasW on Nov 14, 2005 22:29:30 GMT -7
Depends on which way the fans pull the air. If it's from the front to the back, you need to mount the amp face plate down so it will work like a chimney. Otherwise it must be mounted the other direction.
|
|
|
Post by poorboymike on Nov 14, 2005 22:39:59 GMT -7
The fans are at the back and it vents out the front so this should work good.
Thanks again Thomas.
|
|