EP2500 with four IXL 18.4’s

[stokasz]

What is the best way to run these 4 ohm speakers, stereo 8ohm, Stereo 2 ohm or bridged 4 ohm?

I am thinking that I might not have enough power to run these stereo 8 ohm and bridging will double my distortion. So I am leaning towards stereo 2 ohm. Is this what everybody usually does?

[ken]

l run bridged 4 ohm with my ep as my drivers are hard to get at ( l was running 2x 8 ohm) , so go the stereo 2 ohm and you will have plenty of power on tap , l found stereo 8 ohm generally good but on some transiets ( w.o.t.w etc ) it would run into clipping pretty often so l went bridged ( by joining the in wall stereo pair cables together ) to get that bit more headroom l needed........so far so good