Drivers for sale

[db]

Thomas - hope it's ok to post this here. (Deon)

I recently have had a spate of seriously bad luck that started with the loss of my job with Klipsch. My Fiance' and I recently split up, as a result of that and not having a job, my daughter had to move back in with her mother in Pennsylvania, and I'm forced to leave Indiana and head to CA.

I will be working with Thilo of TC Sounds as soon as I get there. Unfortunately I am beyond broke and forced to sell everything I can to get my car running and get out there. I say that so you all understand WHY am selling these items.

am selling theBeast MK-II driver and PR's

www.jdb3.com/ra

Hit the photos link for driver pics.

www.jdb3.com/ra/projects_beastmkii-tsp.html

there are it's parameters. It is a Prototype TC 4HP motor with half an inch gap on an 18" frame built specifically for me several years ago. The voice coil is an 8 layer, 4 tap flat wound Alu coil wrapped around a Ti former (this driver is how Thilo got Precision to finally figure out Ti formers), 3.5"s long 4"'s in diameter.

This also has two 18" PR's with adjustable mass centers, tall profile surrouns. The cone was a prototype built for me using a Nomex Honey Comb core, Fiberglass top surface, and pulped paper rear surface. It's BRAWNY.

I am also selling the miniBeast, which is a dB HE-15 with a 1.1" longer coil. That driver has a painted Al cone with a minor dent. I don't have specs off hand. It's the subwoofer I've used for the last 5 years. This thing belts out some bass.

The 15 also has two adjustable mass PR's.

I also have several 'famous maker' 10" drivers and a few plate amps available.

Please e-mail me for details.

Thanks

Deon Bearden

[e-mail]

[ThomasW]

Deon,

Of course it's fine for you to post your items for sale here.

I'm sorry for the unfortunate series of events that have befallen you. Hopefully your new situation with Thilo will prove fruitful.

I recommend that you post these items on the large forums like AVS or HTF. Given the membership of those forums, hundreds if not thousands of people will see them.

Good luck and I'm sure you'll find the winters in Calif a bit nicer than those in the midwest .......

Regards
Thomas

[db]

Thank you Thomas. I have asked the owner of HTF if I can post as I have almost no posting there, and I do not have the 35$ to pay AVS to be allowed to post there.

[db]

Dumax TSP's on the HE-15 prototype:

Fs: 22.03Hz
Qes: .5912
Qms: 9.8533
Qts: .5578
Vas: 73.2725L
Sd: 647cm^2
Re: 6.5076ohm
Mmd: 409.38g
Cms: .128mm/N
Bl: 25.2563
Xmag: 30.65mm
Xsus: 34.5mm

LMS TSP's on the paper cone 10 and 12" woofers. All have NBR surrounds ~ 1" wide. (24mm)


12" Paper cone woofer - 24mm nbr surround

Re 4.4
Fo 27.7
Sd 469cm^2
Vas 82L
Cms 262 M/N
Mmd 123.8g
Mms 129.7g
BL 13.46 T-M
Qms 5.274
Qes .54
Qts .49
No .299%
SPLo 86.7dB

Paper Cone 10" wofer

Re 4.5
Fo 29.5
Vas 39.4L
Sd 304 cm^2
Cms 299.9 M/N
Mmd 93.48g
Mms 96.54g
BL 13.18 T-M
Qms 6.532
Qes .465
Qts .434
No .212%
SPLo 85.29dB

Alu 12" woofer:

Re 3.6
Fo 29.2
Sd 459 cm^2
Vas 95L
Cms 317 M/N
Mmd 87.3g
Mms 93.03g
BL 10.919 T-M
Qms 6.793
Qes .517
Qts .48
No .448%
SPLo 88.5dB

ALu cone 10"

Re 3.8
Fo 32
Vas 52.8L
Sd 307 cm^2
Cms 392 M/N
Mmd 56.95g
Mms 60.06g
BL 8.189 T-M
Qms 5.941
Qes .701
Qts .627
No .257%
SPLo 86.1dB

[carl]

Pricing?

[formica]

admin said:

I'm sorry for the unfortunate series of events that have befallen you. Hopefully your new situation with Thilo will prove fruitful.

I agree... and can understand your pain... with my father passing away this march and my girlfriend (6-1/2 yrs) leaving me a couple of months later... it forces you to rethink things.

Fortunately, i know things always fall back to place with time...
ROb