gruhl
New Member
Posts: 6
|
Post by gruhl on May 21, 2009 15:45:31 GMT -7
What kind of amplification is everyone using for their 4 Fi18 projects? Are they wiring the 4ohm drivers in series and then in parallel or just getting the 2ohm versions and wiring all four in series? I'm planning an 8 driver project and look forward to your suggestions for amplification. PS, I already own a Crown K2 from my current sub that could be re-used.
|
|
|
Post by ThomasW on May 21, 2009 16:39:45 GMT -7
The request is that people post all questions about their projects in a single build thread. That keeps the data centralized and easy to follow.
So I've answered your question in your original thread..
|
|
|
Post by cobyhughey on Oct 13, 2010 16:47:57 GMT -7
darn, that's the question I was hoping to get answers on. If that's not appropriate here......well, wouldn't that be really appropriate here?
|
|
|
Post by ThomasW on Oct 13, 2010 19:18:58 GMT -7
If that's not appropriate here......well, wouldn't that be really appropriate here? He has an existing project thread, that was and is the appropriate place for his question.
|
|
|
Post by frijoli on Oct 14, 2010 3:34:32 GMT -7
If that's not appropriate here......well, wouldn't that be really appropriate here? He has an existing project thread, that was and is the appropriate place for his question. Thomas, with all due respect what your saying is that once you start a project, then you can't ask specific questions about IB anywhere else. If someone comes to the "cult" looking for specific answers they have to read the "projects" threads all the way through to see if anyone has asked the question If I had realized that would not have started a project thread, so everyone could share in what questions I had to ask. I actually clicked this link, IN, the amplifiers section, not the projects section to see what people had to say about this question. I have never even looked at this persons particular project. Which means I would have missed it altogether. It's your forum, and you can moderate it how you like. Certainly this is my opinion, though I am not alone, but it seem disjointed as a forum used for reference. Clay
|
|
|
Post by ThomasW on Oct 14, 2010 8:14:23 GMT -7
The idea is to have all questions/answers that deal with a specific build contained in the single project thread.
If someone has a random amp question not related to a thread in the project section, this section of the forum is where those questions should be posted.
I apologize if the reasons for this aren't obvious...
|
|
|
Post by frijoli on Oct 15, 2010 20:29:15 GMT -7
The idea is to have all questions/answers that deal with a specific build contained in the single project thread. If someone has a random amp question not related to a thread in the project section, this section of the forum is where those questions should be posted. I apologize if the reasons for this aren't obvious... I understand, but specific questions that aren't specific to a build and COULD be generic should be allowed in specific forums. I also apologize if my thoughts aren't clear as well.
|
|