|
|
Post by stidrvr on Oct 12, 2009 14:59:34 GMT -7
What is the recomened clearance for the bumplates with the baskets facing in? The subs are Ficar IB18s which have holes for venting in the bump plates. Are we talking finger clearance or inches?
|
|
|
|
Post by ThomasW on Oct 12, 2009 17:11:11 GMT -7
The vent is for cooling, so spacing sort of depends on how hard they're going to be driven.
Are you working with a dimension that forces the drivers to be really close together?
|
|
|
|
Post by stidrvr on Oct 12, 2009 17:32:27 GMT -7
Well the current manifolds are 19.25" wide with them mounted on the outside surface facing each other. If mount them baskets in I only have a .25" between bump plates. I would have to put another layer on the outside of the manifold to space them out but then I'll have 2.25" thick baffle which I assume is also not good (interfearing with the rearwave).
It would just be easier to remake the manifolds so that's why I'm asking how much space should I have?
|
|
|
|
Post by ThomasW on Oct 12, 2009 21:37:40 GMT -7
1/4" is to tight, 2.25" would be fine
|
|
|
|
Post by moggie on Nov 26, 2009 15:14:02 GMT -7
|
|
