|
|
Post by Todzilla on Mar 4, 2010 15:15:39 GMT -7
Hi guys,
Does anyone have an IB manifold installation set up in line with the fronts BEHIND an acoustically transparent screen??? Any thoughts on this setup?
|
|
|
|
Post by ThomasW on Mar 4, 2010 16:08:38 GMT -7
Yes there are several people with IBs subs behind AT screens. IIRC there aren't any of those installs documented in this forum.
|
|
|
|
Post by Todzilla on Mar 4, 2010 17:07:15 GMT -7
Thank you Thomas... What do you think about that configuration? If I recess a wall 3 feet behind the screen and have an attic manifold firing down in line with the fronts... Would that work? Would the amount of air being pushed be an issue?
|
|
|
|
Post by ThomasW on Mar 4, 2010 17:53:44 GMT -7
With a 3' space between the IB and the screen, I think your eyeballs would be bleeding were the IB loud enough to move the screen.......  |
|
|
|
Post by Todzilla on Mar 5, 2010 7:20:25 GMT -7
Thanks again Thomas... Time to try to draw that out... ;-)
|
|
jonfo
New Member
Posts: 34 
|
Post by jonfo on Apr 10, 2010 8:09:24 GMT -7
Absolutely no problems. The screen is steady after six years or so of heavy use ;D My setup is just below and behind the AT screen. Works like a champ. |
|
|
|
Post by maxserg on Apr 10, 2010 20:49:54 GMT -7
Hi From what I see from the photo, here is your 4th driver?  |
|
|
|
Post by ThomasW on Apr 10, 2010 21:57:23 GMT -7
From what I see from the photo, here is your 4th driver? This is of course a rhetorical question... |
|
