|
Post by dansar on May 18, 2010 3:04:18 GMT -7
Hi all - great site and have been lurking around reading all the posts for a month or 2 now. I have a Denon AVR 1803 receiver 6.1ch, Kenwood S-F700 fronts, S-C700 centre and S-CRS500 rears. I am currently using an old 135 watt bass head unit and made up a rca-xlr cable to run from the sub-out to the amp this powers the 8" subs mounted on the side of the mains - quite a nice sounding system - all up it has cost me NZ$500 to put my HT system together buying second hand gear.
I want to go down the path of adding PA amps, Crown,Mackie...Blah Blah
Question is how do I go about running additional amps from the Denon? Could someone please describe or even better provide a line drawing of the connections for me? PA amps to run the centre, mains and rears the sub I understand and dont have a problem with.
I realise this is not related to IB entirely, but figured some of you may have gone down this path and could enlighten me.
Or can it not be done with my HT amp?
Thanks in advance Daniel Martin
|
|
|
Post by ThomasW on May 18, 2010 7:26:25 GMT -7
Looking at the owner manual for your receiver you'll see it has no line outputs except for the sub. This means it's not built to operate external amps.
|
|
|
Post by dansar on May 19, 2010 0:51:51 GMT -7
Thanks for that, it was what I thought - but needed to confirm.
|
|