Anyone know the differences between the 3HP, RE HC
May 10, 2011 10:16:12 GMT -7
Post by kryptonitewhite on May 10, 2011 10:16:12 GMT -7
Hey guys, I want to rebuild my 1803s with 5 or more spiders... be it very loose or very tight spiders to kryptonitewhite-proof them. The ones I have now were custom made for IB by Fi, single soft spider. When I replaced the AP30001D something amazing happened... the van started playing as it was supposed to. Most incredible amzing low end output. Air movement that no one would believe unless they actually sat in it, but if you did, rear-end leakage was destined to occure. My family and I had a blast for 2 days, so many looks of aw and amazement and sometimes fear when suddenly things would be recorded louder and lower. Looks of "is the van going to explode? Are we going to die?"
Then, as it just always has to happen, there was a quiet song. Waited it out...nope, not just an intro. Lets fast forward a bit to be sure cuz it sounds neat, but it's so quiet. Still quiet, still sounds good. Let's just turn it up. up. OK, a hair more. Cruisin. Still quiet, but sounds good so what the heck. OH MY GOD WE ARE GOING TO DIE! THE WIND! THE NOSIE! THE VAN IS COMING AP.....
2 coils torn from the spiders at the triple joint. 2 survived.
So I want to recone them with as many spiders as I can fit. Make them all loose to stay as close to TS params as possibe, yet have 5 to pull tight if they get moving too far? Would 5 loose spiders be enough to keep 3kW of fury from ripping things apart and buy me time to flip the kill switch in times like these?
Or would I need 5 or more stiff... really mess up my efficiency? really kill my TS parameters?
Well Scott at Evo got excited. Said he rebuilds TC Sounds 3HPs/RE HCs all the time to take ungodly amounts of power. Jim told me they are basically 3HPs/RE HCs as well.
But Scott at Fi, ya know, the guy that designed them, built them, and reconed the ones I have now... well he says these cant be rebuilt big. Tight gap, not enough motor to overcome extra spiders.
Then Scott at Evo says "well as far as the 3HPs and RE HCs, they have huge gaps and get turned into monsters all the time..."
In addition, Scott of Evo wants $165 per recone. We all know I can't even afford a $50 RS meter or $150 bracket for my 2nd alt... let alone 4 recones and some glue shipped.
KW needs to quit and sell everything cuz he wont take no ones advice and he keeps breaking ****
Then, as it just always has to happen, there was a quiet song. Waited it out...nope, not just an intro. Lets fast forward a bit to be sure cuz it sounds neat, but it's so quiet. Still quiet, still sounds good. Let's just turn it up. up. OK, a hair more. Cruisin. Still quiet, but sounds good so what the heck. OH MY GOD WE ARE GOING TO DIE! THE WIND! THE NOSIE! THE VAN IS COMING AP.....
2 coils torn from the spiders at the triple joint. 2 survived.
So I want to recone them with as many spiders as I can fit. Make them all loose to stay as close to TS params as possibe, yet have 5 to pull tight if they get moving too far? Would 5 loose spiders be enough to keep 3kW of fury from ripping things apart and buy me time to flip the kill switch in times like these?
Or would I need 5 or more stiff... really mess up my efficiency? really kill my TS parameters?
Well Scott at Evo got excited. Said he rebuilds TC Sounds 3HPs/RE HCs all the time to take ungodly amounts of power. Jim told me they are basically 3HPs/RE HCs as well.
But Scott at Fi, ya know, the guy that designed them, built them, and reconed the ones I have now... well he says these cant be rebuilt big. Tight gap, not enough motor to overcome extra spiders.
Then Scott at Evo says "well as far as the 3HPs and RE HCs, they have huge gaps and get turned into monsters all the time..."
In addition, Scott of Evo wants $165 per recone. We all know I can't even afford a $50 RS meter or $150 bracket for my 2nd alt... let alone 4 recones and some glue shipped.
KW needs to quit and sell everything cuz he wont take no ones advice and he keeps breaking ****