|
|
Post by upriver on Jan 18, 2014 22:00:58 GMT -7
Hello,
I've got a couple of Dayton Audio RSS390HF-4 15" Reference HF Subwoofers that I was thinking of using for a small IB setup. I also have a NAD C272 amp that isn't being used anymore. Would it be possible to use the 272 to drive these two 390's?
thanks George |
|
|
|
Post by ThomasW on Jan 19, 2014 7:53:44 GMT -7
It will work, the caveat is of course the short throw of the drivers and comparatively lowish output of the amp.
You can model the anechoic response of the system using WinISD or another similar program.
|
|
|
|
Post by upriver on Jan 19, 2014 10:00:09 GMT -7
Thanks for the prompt reply. Considering I already have all the stuff already sitting around I think I'll give it a shot, it's just for music if that makes much of a difference. If it doesn't work as well as I would like then I'll start upgrading various pieces. I have lots more questions but I'll read for a while before asking something that has been asked several times before.
thanks for the great resource site. |
|
