kyhn
New Member
Posts: 3
|
Post by kyhn on Sept 21, 2005 5:14:04 GMT -7
Hi guys
I am new to this, so bare with me ;-)
I have two fane XB 15 drivers, could these be suiateble for IB use?
|
|
|
Post by ThomasW on Sept 21, 2005 7:22:30 GMT -7
And the T/S parameters for this driver are ?
|
|
kyhn
New Member
Posts: 3
|
Post by kyhn on Sept 22, 2005 0:08:47 GMT -7
In german but here goes:
Gesamtdurchmesser: 485 mm Impedanz: 8 Ohm Einbaudurchmesser des Quadrats: 387,4 mm Leistung: 600 Watt Sinus Dicke des Rahmens: 7,8 mm Ausgangspegel: ----- dB (Dauer/Maximum) Schallwanddurchmesser (Frontmontage): ---- mm Leistungskompression bei Nennleistung: ----- dB Gewicht: 4,6 kg Wirkungsgrad bei 1W/1m: 99 dB Magnetfeld-Tiefe: 9,5 mm Resonanzfrequenz fs: 37,6 Hz Gewicht des Magneten: 3,6 kg Gleichstromwiderstand Re: 6,6 Ohm Gesamtgüte Qts: 0,0,32 Konstruktion el. Güte Qes: 0,37 Schwingspule: aus Aluminium mech. Güte Qms: 2,19 Gusskorb aus Aluminium eff. Membranmasse: 130 g Schwingspulenhöhe: 19 mm Cms: 211 mm/N Länge der Schwingspule: 27 m Kraftfaktor BL: 37 Tm Schwingspulendurchmesser: 102 mm Vas: 144 L Membranfläche Sd: 0,086 m2 max. lineare Auslenkung Xmax: ---- mm
|
|
|
Post by ThomasW on Sept 22, 2005 7:22:56 GMT -7
It's not all the difficult to plug the text into an online translation engine
Overall diameter: 485 mm of impedance: 8 ohms of einbaudurchmesser of the square: 387.4 mm of achievement: 600 Watts of sine thickness of the framework: 7.8 mm of output levels: ---- railways (continuous/maximum) acoustic baffle diameter (front assembly): --- mm of achievement compression during rated output: ---- railways weight: 4.6 kg efficiency with 1W/1m: 99 railways magnetic field depth: 9.5 mm of resonant frequency telex: 37.6 cycles per second weight of the magnet: 3.6 kg d.c. resistance RH: 6.6 ohms of total quality Qts: 0.0.32 construction el. Quality Qes: 0.37 moving coil: from aluminum mechanical quality Qms: 2.19 casting basket from aluminum EFF. Diaphragm mass: 130 g moving coil height: 19 mm of Cms: 211 mm/N length of the moving coil: 27 m force factor BL: 37 TM moving coil diameters: 102 mm of Vas: 144 L diaphragm surface Sd: 0.086 m2 max. linear deflection Xmax: --- mm
It's basically a prosound driver with a Fs of 37.6Hz. That's pretty high. I guess you could try it but without an Xmax number it's questionable how it will work. If it has a accordion surround don't use it in an IB.
|
|
kyhn
New Member
Posts: 3
|
Post by kyhn on Sept 23, 2005 0:57:46 GMT -7
Yes its prodriver, I have them from an old project.
Xmax is quit high 14,27mm and it has accordion surround.
so I´ll find other use for it!
thanks for your help
|
|