phunt
New Member
Posts: 36
|
Post by phunt on Apr 19, 2006 8:14:41 GMT -7
I want to use 2 of the 7 channels from my Sherbourn home theater amp to power 4 soundsplinter 15's 1) would this amp hold up and provide enough clean power?? 2) if not I could I use 4 channels if I have to? 3) I can also bridge it to 400 wats at 8 ohms Specks of the amp can be viewed here. www.sherbourn.com/PDF/datasheet_7-2100A.pdfsorry it wont let me cut and paste the specks.
|
|
|
Post by ThomasW on Apr 19, 2006 8:29:33 GMT -7
FIRST, USING ALL CAPITALS TO SHOUT THE TITLE OF A THREAD IS RUDE, HARD TO READ!
Second, please stop making a new thread for every question you think up. That's why there's a "My Project" section. That's the place to start one thread and ask every question about your project.
Third, try the amp, if it works fine. The RL-p 15"s have a very stiff suspension, so you may need a dedicated amp with more power. All of this is of course contingent on how loud you're going to drive the woofers.
|
|
phunt
New Member
Posts: 36
|
Post by phunt on Apr 19, 2006 8:41:42 GMT -7
Sorry about the caps! I posted the question here because it was about amps and I was looking for a quick answer before I order the speakers.
Again sorry.
|
|