|
|
Post by wrager on Aug 2, 2007 16:56:47 GMT -7
I recently saw how the ART causes significant roll off below 20Hz. I have an SMS-1 so I figured I can eliminate the ART. Is this correct? Will the SMS compensate foe the lower input signal from the Nady?
|
|
|
|
Post by ThomasW on Aug 2, 2007 18:12:08 GMT -7
The CleanBox roll-off can be fixed with a couple $0.50 caps.
Never layed hands on a SMS but most EQ's aren't designed to be line level shifters.
|
|
|
|
Post by jgsabato on Sept 17, 2007 9:12:02 GMT -7
Thomas,
Can you pass on whch 2 caps to change and what values to use? I am using the box in my system and would like to do the mod. Thanks.
|
|
|
|
Post by ThomasW on Sept 17, 2007 10:01:32 GMT -7
Change C7 & C8 to .47mdf or higher. In this picture they've been changed to 1.0mfd  |
|
|
|
Post by jgsabato on Sept 24, 2007 8:29:28 GMT -7
Thanks Thomas, i assume this moves the rolloff point low enough that it takes you sub-sonic, but still gives protection against DC getting through.
|
|
|
|
Post by ThomasW on Sept 24, 2007 9:02:37 GMT -7
No one doing the mod has reported any problems... Before and after.  |
|
