mikie
New Member
Posts: 5
|
Post by mikie on Apr 27, 2007 16:32:19 GMT -7
First off - thanks to the info on this site my IB is installed, BFD'd & awesome (thanks a million ). I have alot of old albums, but I understand that there are low frequency issues when playing vinyl records. Unfortunately my options for low end filtering are are a pain (dip switches on the back of the EP2500 or resetting speaker settings on my receiver). Does anyone know of a low freqency filter that can be inserted between the turntable and the receiver to address this problem? Thanks - Mikie
|
|
|
Post by ThomasW on Apr 28, 2007 7:51:58 GMT -7
Rumble filters are typically used for vinyl.
These aren't put between the TT and the preamp because the signal level is so low, as a result they're built into the preamp.
The normal hinge frequency is 20Hz. If you're using EQ like the Behringer or similar you could use a filter at that frequency.
|
|
mikie
New Member
Posts: 5
|
Post by mikie on Apr 28, 2007 8:34:03 GMT -7
Thanks Thomas - a no cost solution - Mikie
|
|